Must be an up-to-date 300-425 pdf dumps to help you pass the Cisco 300-425 ENWLSD exam. We just updated the 300-425 pdf dumps.
Prepare for Cisco 300-425 Certification exam by Cisco 300-425 pdf dumps, Cisco 300-425 dumps (The most recommended way by the Cisco Certified Experts to prepare CCNP Enterprise certification exam in the shortest and easiest way). What you’re looking for is here! https://www.pass4itsure.com/300-425.html provides authentic and updated 300-425 pdf dumps, success!
New PDF + 300-425 Dumps
| Dumps Version | Total Questions | Release Date |
| 300-425 pdf dumps | 102 | 2020.06.1 |
| latest 300-425 pdf dumps | 120 | 2022.12.3 |
Designing Cisco Enterprise Wireless Networks (300-425 ENWLSD)
List of Related Exams
- 300-401 Implementing and Operating Cisco Enterprise Network Core Technologies (ENCOR)
- 300-410 Implementing Cisco Enterprise Advanced Routing and Services (ENARSI)
- 300-415 Implementing Cisco SD-WAN Solutions (ENSDWI)
- 300-420 Designing Cisco Enterprise Networks (ENSLD)
- 300-430 Implementing Cisco Enterprise Wireless Networks (ENWLSI)
- 300-435 Automating and Programming Cisco Enterprise Solutions (ENAUTO)
- 350-401 Implementing Cisco Enterprise Network Core Technologies (ENCOR)
There Are Many Ways by Which You Can Prepare for Your 300-425 Exam:
- Prepare for 300-425 Certification by Cisco books
- Prepare for the 300-425 Certification exam by watching online video training
- Joining coaching classes
The shortest and easiest way: Prepare for the 300-425 certification exam by 300-425 pdf dumps
latest Cisco 300-425 exam questions and answers in PDF format
[Latest – 2022] Cisco 300-425 pdf dumps https://drive.google.com/file/d/1NqMSl09kHM7hyJmh-l9_q2elqrw9OhAd/view?usp=share_link
Newly updated 300-425 ENWLSD exam questions 1-15:
New Question 1:
A network engineer is working on a predictive WLAN design, the new wireless network must support access to Internet, email, voice, and the inventory database, to successfully support these services, which configuration must the engineer use for the signal strength levels and SNR on the planning tool?
A. signal strength of-67 dBm, 25-dB SNR, and maximum 1 percent packet loss.
B. signal strength of-67 dBm, 20-dB SNR, and maximum 5 percent, packet loss.
C. signal strength of 67 dBm, 20-dB SNR, and maximum 1 percent packet loss.
D. signal strength of-70 dBm,30-dB SNR. and maximum 10 percent packet loss.
Correct Answer: A
New Question 2:
Which two considerations must a network engineer have when planning for voice over wireless roaming? (Choose two.)
A. Full reauthentication introduces gaps in a voice conversation.
B. Roaming time increases when using 802.1x + Cisco Centralized Key Management.
C. Roaming occurs when the phone has seen at least four APs.
D. Roaming occurs when the phone has reached-80 dBs or below.
E. Roaming with only 802.1x authentication requires full reauthentication.
Correct Answer: AE
New Question 3:
Refer to the exhibit.
An engineer is about to establish a mobility peer connection between a Cisco Catalyst 9800-CL version 16.10.1e and Cisco AireOS 5520 version 8.8.120.0. The data path between the 9800-CL and AireOS 5520 is down, but its control path is up. Based on the configuration, what is the cause of the issue?
A. The certificate hash key is incorrect leading to data path down.
B. The data-link-encryption configuration is missing from the 9800-CL configuration.
C. Encrypted mobility is being used in the 5520 configuration leading to data path down.
D. CAPS is used to key in MAC address in the IOS_XE configuration leading to data path down.
Correct Answer: B
New Question 4:
WLC SSO is set up between two WLCs in a service provider network serving public spaces. On WLC failover, it is noticed that only about half of the original client count is now showing on the secondary WLC, although it is currently showing the role as active. Which design side case explains the issue?
A. The secondary WLC platform does not support the required client count.
B. The WLCs had not completed database sync before the primary failure.
C. SSO is not configured correctly.
D. Some client sessions were in WebAuth-Req state before failover.
Correct Answer: D
New Question 5:
A customer requires that two wireless APs be installed in a reception area, in a historic building, the impact of the APs on the appearance of the reception area must be minimized. Which two AP antennas should be used? (Choose two.)
A. AP with a Yagi antenna
B. AP with a patch antenna
C. AP with a monopole antenna
D. AP with an integrated antenna
E. AP with a dipole antenna
Correct Answer: AB
New Question 6:
A wireless network consultant must assess an existing wireless LAN controller. Which section must the consultant check before replacing the old APs with APs that are IEEE 802.11ac-capable?
A. number of AP licenses
B. controller PSU
C. throughput capacity
D. software version
Correct Answer: A
New Question 7:
An engineer is designing a new wireless network. The network needs to fulfill the following requirements:
1. support multimedia applications
2. support a high concentration of wireless clients
3. support data over wireless
4. support roaming Which approach should be used?
A. use of micro cells with reduced power levels
B. use of macro cells with reduced power levels
C. coverage for cells at maximum power levels
D. use of macro cells with maximum power levels
Correct Answer: A
New Question 8:
An engineer is configuring a centralized set of controllers for separate facilities. Which two Cisco wireless architectures must be used to ensure flexible sizing of WLAN to VLAN mappings? (Choose two.)
A. interface group
B. mobility group
C. AP group
D. controller group
E. RF group
Correct Answer: BC
New Question 9:
Which CLI command does an engineer use to validate that the redundancy peer of a Stateful Switchover pair of controllers is up and connected?
A. rping
B. ping
C. eping
D. mping
Correct Answer: B
Reference:
New Question 10:
An engineer changed the TPC Power Threshold for and wireless deployment from the default value to-65 dBm. The engineer conducts a new post-deployment Survey to validate the results What is the expected outcome?
A. Increase cell size
B. Decreased client signal strength
C. Increased received sensitivity
D. Decreased channel overlap
Correct Answer: B
New Question 11:
Refer to the exhibit.
A WLC SSO pair is set up. Which failure scenario causes a split-brain scenario?
A. RP is down.
B. Two distribution ports on the active WLC are down.
C. VSL is down.
D. One distribution port on the active WLC is down.
Correct Answer: C
New Question 12:
The wireless team must configure a new voice SSID for optimized roaming across multiple WLCs with Cisco 8821 phones. Which two settings accomplish this goal? (Choose two.)
A. Configure mobility groups between WLCs.
B. Use Cisco Centralized Key Management for authentication.
C. Configure AP groups between WLCs.
D. Configure AVC profile on new SSID.
E. Use AVC to tag traffic voice traffic as best effort.
Correct Answer: BE
New Question 13:
A customer called with a requirement that internal clients must be on different subnets depending on the building they are in. All access points are operating in local mode and will not be modified, and this is a single controller solution. Which design approach creates the desired result?
A. Create AP groups for each desired location, map the correct VLANs to the internal SSID, and add the access points for that location.
B. Create an SSID place it to the desired VLAN under WLANs and configure 802.1x in ISE to assign the correct VLAN based on the SSID from which the client is authenticating
C. Create FlexConnect groups, place the access points in, and set the correct VLAN to SSID mapping based on location.
D. Create mobility anchors for the SSID and on the controller under the internal SSID create a foreign map to the desired VLAN based on location.
Correct Answer: A
New Question 14:
A wireless engineer is using Ekahau site survey to validate that an existing wireless network is operating as expected, which type of survey should be using to identify the end-to-end network performance?
A. GPS assisted
B. Spectrum analysis
C. Passive
D. Active ping
Correct Answer: B
Reference: https://support.ekahau.com/hc/en-us/articles/115004973067-Spectrum-Analysis-Surveys
New Question 15:
A network engineer is working on a design for a wireless network that must support data, voice, and location services. To support these services, which access point placement must the engineer use?
A. corner only
B. perimeter and corner
C. perimeter only
D. indoor and outdoor
Correct Answer: B
Reference:
Get the best 300-425 pdf dumps, Cisco 300-425 dumps, and 300-425 exam questions https://www.pass4itsure.com/300-425.html Lot of material for preparing for 300-425 certification. Study hard and pass the exam!